|
|
Static provision of castle in city Drnovice
Caloň, Radim ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The goal of the project is a static provision design of Drnovice castle. This castle (today a municipal office and a restaurant) is violated by vertical cracks. There is a significant horizontal displacement vector. That’s why horizontal prestress redevelopment (using prestressed cables) was chosen. A drawing documentation is an integral part of the project.
|
|
|
Static analysis of steel footbridge
Mareková, Adela ; Martinásek, Josef (referee) ; Vlk, Zbyněk (advisor)
The subject of the bachelor thesis is static analysis of a steel footbridge. Two different models of this structure are created in RFEM 5.16 software. The first model consists only of the upper part of the structure, the second model includes also the bottom part – columns. The load is calculated manually and applied on both models in the same way. RFEM software was also used for performing the calculation. The results from models are compared between each other and ultimate limit state assessment is carried out.
|
|
|
The five-cylinder inline diesel engine with eccentric crank mechanism
Süttő, Daniel ; Kaplan, Zdeněk (referee) ; Píštěk, Václav (advisor)
The aim of this thesis is to find out the influence of eccentricity of crank mechanism on the duration of the force between the piston and the cylinder liner. At the same time I wanted to find out its influence on the balance of the whole system. It is important to design the balance for the selected value of the eccentricity and subsequently put through the crank shaft to stress analysis with torsional vibrations. I got so interested in this problem that in addition to the whole topic I designed a torsional vibration damper.
|
|
|
Fault Diagnosis of electrical machines using vibrations
Čech, Roman ; Hájek, Vítězslav (referee) ; Janda, Marcel (advisor)
The task of this thesis is to introduce the problems of vibrafon sources in asynchronous motor and their effects and risks to the engine. We will classify the sources of vibration, we will focus for the defects of bearings and for dynamic and static eccentricity. The thesis includes vibration measurement for asynchronous motor, analysis and evaluation of bearings defects and eccentricities.
|
|
|
Vibrodiagnostics of electrical machines
Boháček, Daniel ; Vítek, Ondřej (referee) ; Janda, Marcel (advisor)
This thesis deals with methods of vibration analysis in electric rotating machines. From the beginning, it is necessary to explain the basic concepts and introduce the issue of vibration. Next time, the work is focused on sources of vibration in electrical machines. Defects on electric rotating machines causing vibrations are described. Sensing is performed using sensors of deflection, speed and acceleration. The measured signal needs to be adjusted and filters, approximations and sampling will cover this in the next chapter. The main objective is the methods of analysis, which include the best known in the field of frequency analysis (FFT) and the envelope method in the time domain. This includes other methods such as Kurtosis factor, Crest factor, etc. There is also a basic block diagram for measuring vibrations. This block diagram is programmed and has a graphical user interface. The last part is an evaluation of the measured data of the engines.
|
|
|
Three-cylinder inline diesel engine with an eccentric crank for commercial vehicles
Domský, Viktor ; Kaplan, Zdeněk (referee) ; Píštěk, Václav (advisor)
The goal is to investigate the influence of eccentricity on the force between the piston and the cylinder liner and the influence on balancing of the crank mechanism. For a selected eccentricity suggest a balancing method and perform stress analysis of crankshaft considering torsional vibration. Eccentricity is chosen by the ratio of centric and eccentric mechanism of friction work. The paper shows the effect of eccentricity on the selected kinematics values. Stress analysis is done in the software ANSYS. Using selected eccentricity the friction work was reduced by 10 %.
|
|
| |
|
|
Design of lathe chuck with machine-adjustable excentricity
Petrych, Jan ; Holub, Michal (referee) ; Tůma, Jiří (advisor)
This master´s thesis focuses on constructional design of chuck with settable eccentricity in two axes. The first part consists of brief analysis of the clamping of CNC machines and summary of available chucks with settable eccentricity. Next part deals with study of possible construction designs. Two construction variants will be based on those designs in the next part. Following part then describes dimensionality of the main parts of the chuck. Based on the calculations, the 3D model of chosen variant is created with the description of its functionality. Finally the conditions of operation for the chuck are described.
|
|
|
Rotor fault diagnosis of induction motors
Bednařík, Václav ; Cipín, Radoslav (referee) ; Vítek, Ondřej (advisor)
This bachelor thesis focus on the faults of induction motors. In general terms to mechanical and electirc faults and their influence on induction motor. Further on the tests, that are conducted on induction motors to detect faults and states that precede them. Main part is devoted to rotor eccentricity and broken rotor bars. Eccentricity is solved within theoretical analysis and measurements on free damaged motors. As well as broken rotor bars, which are supplemented by measurements on three damaged rotors. There are two types of eccentricity, static and dynamic. Faults of broken rotor bars is solved in terms of postion of broken rotor bars and their number.
|
|
|
The influence of eccentricity upon the radial forces in an induction motor
Formánek, Jakub ; Hájek, Vítězslav (referee) ; Janda, Marcel (advisor)
The aim of this master thesis is to get familiar with the influence of radial forces in the induction machine. Induction motor is one of the most commonly used and most extended type of machine, therefore it is useful to detect the intensity of theese forces and their influence at operation of the machine. In this work ,radial forces are computed by the software simulation in ANSYS Maxwell. Models are created with help of module Rmxprt and finite elements method.These models are based on real induction motors with predefined size of eccentricity. In the final part we perform a measurement of deviations on the real machine using vibrometer.
|
guest ::
